- 802.11g Wireless Turbo Access Point, 4-Port Ethernet switch, Router, Advanced firewall
- Integrated 54 Mbps 802.11g Wireless Turbo Access Point
- One (1) RJ-45, 10/100 Mbps auto-sensing and auto-switching Ethernet WAN port
- Four (4) RJ-45, 10/100 Mbps auto-sensing and auto-switching Ethernet LAN ports
- DHCP server (LAN) and client (WAN)
From the Manufacturer
Faster speed, greater compatibility, better security
Exclusive 100 Mbps Accelerator Technology
Includes Accelerator Technology. Send and receive data at performance levels equivalent to 100 Mbps all on a single channel to ensure greater network capacity and the highest data throughput.
Greater 802.11g/b wireless compatibility
Maximize the speed you purchased -- greater 802.11g and 802.11b compatibility allows each device to connect at the fastest speed possible!
Superior security
Up to 10 times more secure than standard wireless networks! Your data is secure with advanced features.
- Built-in 256-bit Wired Equivalent Privacy (WEP) encryption
- WPA (Wi-Fi Protected Access) protects your privacy and important data from hackers†
- Built-in MAC address authentication
- 802.1x network authentication support
4 products in 1
This powerful wireless router is four products in one
- 802.11g Wireless Turbo Access Point
- 4-Port Ethernet switch
- Router
- Advanced firewall
Access point
Provides seamless connectivity with both wired and wireless networks.
Greater range
Wirelessly network with 30 percent greater range and better area coverage than conventional 54 Mbps wireless products.
Detachable antennas
Dual dipole antennas with reverse polarity SMA connectors easily detaches for upgrading/replacing for enhanced performance.
Standards and Specifications
- Integrated 54 Mbps 802.11g Wireless Turbo Access Point
- One RJ-45, 10/100 Mbps auto-sensing and auto-switching Ethernet WAN port
- Four RJ-45, 10/100 Mbps auto-sensing and auto-switching Ethernet LAN ports
- DHCP server (LAN) and client (WAN)
- Static and Dynamic IP addressing
- PPP over Ethernet (PPPoE) support
- Embedded PPTP Client
- VPN pass-through support for PPTP, L2TP, and IPSec
- DMZ host support
Security Features
- Integrated firewall
- 64/128/256-bit Wired Equivalent Privacy (WEP) encryption
- Disable Broadcast SSID
- 802.1x network authentication support
- Wi-Fi Protected Access (WPA)
- MAC address authentication (50 MAC addresses) and wireless association control
Product Description
U.S. Robotics 802.11g Wireless Turbo networking products offer a total solution. U.S. Robotics' simple to install portfolio is sure to meet your particular networking needs.802.11g Wireless Turbo Access Point and Router, model USR8054, is ideal for sharing high-speed Internet access among multiple computers. It includes built-in MAC address authentication.
| Manuals and other Documents |
|
|
| Troubleshooting |
|
|
| Firmware |
Version 1.67b44 (125 Mbps Update)
Note: Upgrading to version 1.67b44 may reset your wireless router to the factory default settings, including your password. We recommend that you write down your configuration settings prior to upgrading, reset the wireless router to defaults, and then re-configure your router after the upgrade. USRobotics is offering this update to improve issues with frequent router resets under certain data traffic conditions. |
| USR8054_v167b44.zip |
608 KB |
04-18-05 |
|
Version 1.64b34 (125 Mbps Upgrade)
Note: Upgrading to version 1.64b34 below will reset your wireless router to the factory default settings, including your password. USRobotics is offering this 125 Mbps upgrade to enhance connectivity via the following features:
- WPA and WPA-PSK wireless security modes
- 125 Mbps frame bursting enhancement
- Dynamic wireless channel to avoid interference
- Supports reception of Multicast streaming to LAN clients
- Improved browser support
- Improved wireless sensitivity prevents resets in noisy environments
|
| USR8054_v164b34.zip |
606 KB |
10-01-04 |
|
|
| Version 1.21h (100 Mbps) |
| Download and extract this file to a temporary location on your computer's hard disk drive. Follow the directions in the upgrade.txt file to complete the update.
Note: Upgrading to version 1.21h below will reset your wireless router to the factory default settings, including your password. However, if you receive a The version of setting file is not compatible message, you need to manually restore the router to its original default settings as described here. In addition, flashing your USRobotics 802.11g Wireless Turbo Router with anything other than USRobotics approved firmware will void your warranty. |
| USR8054_v1.21h.zip |
540 KB |
03-02-04 |
|
